c
2026 Sun Hydraulics 1 of 4
MODEL
X2EXX2EX
Solenoid-operated, rapid advance and feed flow control
assembly
CAPACITY:CAPACITY: 120 L/min. 120 L/min.
Meter In P Normally Closed
Meter In P Normally Open
This assembly consists of a fixed-orifice, pressure-compensated flow control valve which
provides precise flow regulation for meter-in or meter-out applications where there may be
wide pressure fluctuations. The flow setting is specified by the user and is set at the factory.
The rapid or feed rate is selected by a solenoid operated (normally open or closed) 2-way, 2-
position valve.
sunhydraulics.com/model/
X2EX
TECHNICAL DATATECHNICAL DATA
Body Type Sandwich
Interface ISO 05 - X&Y
Capacity 120 L/min.
Body Features Meter in P
Stack Height 63 mm
Seal Plate Included (see notes) No
Control Flow Range 0 - 12 gpm
Model Weight 2.01 kg.
NOTESNOTES
Stack height value in technical data table includes seal retainer plate.
This installation requires a seal retainer plate and seal kit which are purchased separately. See "Related Accessories"
section.
For detailed information regarding the cartridges contained in this assembly, click on the models codes shown in the
Included Components tab.
Important:Important:
Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the
manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for
pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.
c
2026 Sun Hydraulics 2 of 4
MODEL
X2EXX2EX
Solenoid-operated, rapid advance and feed flow control
assembly
CAPACITY:CAPACITY: 120 L/min. 120 L/min.
Continued fromContinued from
previous pageprevious page
(L)(L)CONTROLCONTROL
LL Tuning Adjustment
XX Not Adjustable
(A)(A)ADJUSTMENT RANGEADJUSTMENT RANGE
AA Replaceable Orifice .1 - 12 gpm (0,4 - 45
L/min.)
(N)(N)SEAL MATERIALSEAL MATERIAL
NN Buna-N
VV Viton
(F)(F)
1 2 3 4
5 6 7 8
9 10 11 12
(224)(224)COIL *COIL *
224224 DIN 43650-Form A, 24 VDC
No Coil
* Additional coil options are available
INCLUDED COMPONENTSINCLUDED COMPONENTS
PartPart DescriptionDescription QuantityQuantity
DFDA8DN Cartridge 1
DTAFMHN224 Cartridge 1
FXDALAN Cartridge - Primary 1
OPTION SELECTION EXAMPLE: X2EXOPTION SELECTION EXAMPLE: X2EXLLAANNFFAA224224
SOLENOID DESIGNATIONSOLENOID DESIGNATION
FF 740 Coil-Normally Open (with FXDA primary cartridge, Fixed-orifice, pressure compensated flow control valve)
UU 740 Coil-Normally Closed (with FXDA primary cartridge, Fixed-orifice, pressure compensated flow control valve)
XX No Solenoid Valve (with FXDA primary cartridge, Fixed-orifice, pressure compensated flow control valve)
TECHNICAL FEATURESTECHNICAL FEATURES
The sharp-edged orifice design minimizes flow variations due to viscosity changes.
The tuneable control option provides +/- 25% variation from the nominal factory pre-set flow. Turn the adjustment clockwise to
increase.
Customer must specify a flow rating. Factory set flow ratings are within +/- 10% of the requested setting.
Now available with FLeX Series solenoid valves. See CONFIGURATION section, SOLENOID DESIGNATION to specify.
MANIFOLD FACESMANIFOLD FACES
FACE GRIDFACE GRID
PRIMARY CARTRIDGE CONFIGURATIONPRIMARY CARTRIDGE CONFIGURATION
c
2026 Sun Hydraulics 3 of 4
Face 2Face 2
Face 5Face 5
Face 6Face 6
c
2026 Sun Hydraulics 4 of 4
Face 7Face 7
Face 8Face 8
Face 10Face 10
